Looking for particular bodies or illumination?

Use the dropdown below to see all options.

Over the years we have developed a wide range of illumination options for our pushbuttons.

Single

  • Available with C2, C2M,C3,C3P,Jumbo,Optic & Bar
  • Before acceptance call – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Available with C2, C2M, C3, C3P, Jumbo,Optic & Bar
  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.
  • DIM and FULL brightness are the same colour.

BI

  • Available with C2, & Bar
  • Before call acceptance – Both legend and halo are DIM illuminated white.
  • After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.
  • Due to DIM colour (white) adding to FULL brightness colour.  FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.

BI+

Available with C2M , C3, C3P, Jumbo & Optic Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour. After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour. BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

2 Colour

Available with US97 only Before call acceptance - Legend illuminates at full brightness in white only. After call acceptance - Legend illuminated as before and halo illuminates at full brightness in red, amber or green.

Key

DIM = 10% of FULL brightness FULL = 100% brightness BACKGROUND = 100% brightness Legend = Character or symbol Halo = Light created between pressel and surround or separate bezel

Our pushbutton bodies are below to help you make the appropriate choice for your installation.

Compact 3P

  • Low profile (less than 20mm)
  • All possible contact configurations
  • Full range of illumination options

Compact 2 Micro

  • Low profile (less than 20mm)
  • Connector rather than spade terminals
  • Only available with 1 n/o contact
  • Limited illumination options

US91 Bar

  • Limited contact configurations
  • Extra wide button to draw attention to a particular floor
  • Limited range of illumination options

Compact 3

  • All possible contact configurations
  • Accepts shunt boards
  • Full range of illumination options

Compact 2

  • All possible contact configurations
  • Accepts shunt boards
  • Wide range of illumination options

US97-EN

  • IP66 / IP67 Waterproof button
  • All possible contact configurations
  • Limited range of illumination options

New Jumbo

  • All possible contact configurations
  • Accepts shunt boards
  • Full range of illumination options

New US85

  • All possible contact configurations
  • Accepts shunt boards
  • Full range of illumination options

Showing 1–12 of 51 results

Show sidebar
Close

Jumbo US90 Pushbutton

The US90 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US90 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
  • 30mm high tactile legend
  • Matches standard US90 Compact 2 range
  • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
  • Matching range includes keyswitches, rocker switches and indicators
  • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54)
  • Two body depths available, standard and low profile
  • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
  • Large range of pressel legends
  • Vandal resistant with stainless steel front
Close

Jumbo US90-30

The US90-30 Jumbo Pushbutton is a classic square extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30 Jumbo has an identical appearance to the standard US90-15 and so the two buttons can be used on faceplates together when appropriate.
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 2
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 30mm high tactile legend + Braille (Embossed)
Close

Jumbo US90-30EN Pushbutton

The US90-30EN Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The US90-30EN Jumbo has an identical appearance to the standard US90-EN and so the two buttons can be used on faceplates together when appropriate.
  • Legend and halo illumination
  • Large range of pressel legends
  • 30mm high tactile legend (Moulded through)
  • Vandal resistant EN81-71 cat 2
  • High contrast ratio between pressel and legend
  • Meets EN81-70
Close

Jumbo US91 Pushbutton

The US91 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US91 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
  • Legend and halo illumination
  • Large range of pressel legends
  • 30mm high tactile legend (Moulded through)
  • Vandal resistant EN81-71 cat 2
  • High contrast ratio between pressel and legend
Close

Jumbo US91-30 Pushbutton

The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
  • 30mm high tactile legend
  • Matches standard US91-15 Compact 2 range
Close

Jumbo US91-30EN Pushbutton

The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
Close

Jumbo US95-30 Pushbutton

The US95-30 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.
Close

Jumbo US95-30EN Pushbutton

The US95-30EN Braille Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30EN Jumbo has an identical appearance to the standard US95-EN and so the two buttons can be used on faceplates together when appropriate.
Close

Jumbo US96-30

The US96-30 Braille Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-30 Jumbo has an identical appearance to the standard US96 and so the two buttons can be used on faceplates together when appropriate. The US96-30 is available with the standard body or low profile, a useful option for surface mount.
Close

Jumbo US96-30EN Pushbutton

The US96-30EN Braille Jumbo Pushbutton is a classic square extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-30EN Jumbo has an identical appearance to the standard US96-EN and so the two buttons can be used on faceplates together when appropriate. The US96-30EN is available with the standard body or low profile, a useful option for surface mount.
Close

M-20 REB Pushbutton

The M-20 REB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and the pressel, with the added advantage of Standard English Braille. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
  • No studding required
  • Separate legend and halo illumination
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 15mm high tactile legend + Braille (Moulded through)
  • Meets EN81-70
Close

M-20 RET Pushbutton

The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
  • No studding required
  • Separate legend and halo illumination
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 15mm high tactile legend (Moulded through)
  • Meets EN81-70